WEIGHING ON BELT
DOSING SCREW CONVEYOR
GRAVIMETRIC DOSING
FILL / EMPTY BIG BAGS
PNEUMATIC TRANSPORT
LIQUID DOSING SYSTEMS
QUICK RADIANT PLATE DRIER
VARIOUS MACHINES
STATIC WEIGHING

DPV - ELECTROMAGNETIC VIBRATORY FEED BATCHER

The type DPV dosers are indicated in the dosing of powders with low flow rates.
The batchers comprise a storage hopper, a feed device and a scale that controls decreasing weight during product discharge.
Each type of batcher is available with a broad range of motor drives and in customized versions to suit the process.
When the scale is combined with suitable electronics, the batcher can operate in batching and/or continuous mode with controlled feed rate. In the latter mode, hopper refill is controlled by electronics with no need to interrupt the batching process.

Scheda tecnica

Manuale

 

CDC - DISPENSING BIN FOR CDC MILLS

The CDC dispensing bin charges 1 or 2 chamber mills with grinding bodies without the need to stop the milling cycle. This solution also leads to increased milling performance due to even distribution of the milling bodies, apart from increased productivity as no charging stops are required.
Mills are recharged through weight-subtracting batches linked with bulk ceramic material load. The electromagnetic vibrating channel extractor allows the dispensing bin to be operated either with alumina balls or silica pebbles.

Scheda tecnica

Manuale

 
STADCERT S.R.L.
CURRENT TIME
CURRENT DATE
WEIGHING ON BELT
Copyright © 2015 www.stadsrl.com | RD Design | Disclaimer & Privacy Policy
STAD S.r.l. Via per Reggio, 30/P 42019 Scandiano (RE) Italy P. IVA / C.F. / Reg. imp. 01847550355 - Cap. soc. 31200,00 i.v. - R.E.A. di RE nr. 229083